Oontz manual

You can use your OontZ Curve when it is charging. The OontZ Curve, when fully charged, has a play time of up to 3 to 5 hours, depending on volume. Note: At full volume the OontZ Curve play time will be up to 3 hours.

It is quick and easy to pair and wirelessly connect to your Bluetooth device by following these steps:. Step 1 — Make sure your OontZ Curve has sufficient charge or connect to charging source. Step 2 — Turn on the OontZ Curve, it will automatically go into pairing mode in about 3 — 5 seconds. The Bluetooth button on top will flash blue on and off.

Step 5 — You can now wirelessly play your music or the audio from videos, games and movies. You can use your device and the buttons on the OontZ curve to control your audio, see section 4 —The Buttons items 3, 4 and 5.

You can then pair and connect to the next device. The OontZ Curve will automatically try to pair to the last connected device each time the OontZ Curve is turned on and that device is or comes within range.

You can then connect the next device. To pair with a laptop please follow steps 1 and 2 in section 5. Then follow the Bluetooth pairing instructions for your laptop or MacBook.

You will need to first set up the OontZ Curve as a device on your system and then select it from your list of set up devices. The OontZ Curve may show up on your list of Bluetooth devices before it is set up, but you still need to go through the set up step first, or the OontZ will not be able to pair. If your MacBook or iPad or other laptop gives you an option during set up to choose Mono or Stereo, always choose Stereo. Please note that we have instructions and videos on our website: TheOontZ.

Incoming calls: when you receive a call you may answer it on your phone or by pressing the Bluetooth and Phone Button on the top of the OontZ Curve. Hold the button for a short one second press to answer the call. Hold the button for three seconds to reject the call. Your caller will be heard on the OontZ Curve and your voice will be picked up by the microphone. Please have the microphone faced towards you and keep a close proximity to the microphone to have your voice clear to the listener.

Make sure the OontZ BudZ is in pairing mode, the blue light should be flashing. Disconnect the other device from the OontZ BudZ. Make sure volume is up on your device and the OontZ BudZ. Turn the OontZ BudZ off then on again. If your device is connected to another Bluetooth accessory, this may interfere with the pairing process, make sure your device is not connected to any other Bluetooth accessory when pairing to the OontZ BudZ Paired Bluetooth device will not connect Make sure the OontZ BudZ is not currently connected to any other device.

Turn the OontZ BudZ off and back on. Make sure your Bluetooth device is playing audio, not paused and volume is up. Your Bluetooth device may be out of range, move closer within 33 unobstructed feet.

Turn your OontZ BudZ off and back on. Some devices have a default volume when they connect to a new device, try turning up the volume on the headphones and device after connecting. Try another track or music app. It may be that you need to re-pair the OontZ BudZ with your device. Music does not resume after hanging up a call Ensure you have paired the OontZ BudZ correctly with your Bluetooth device Resume music play on the Bluetooth connected device Windows laptop is asking for drivers The OontZ BudZ does not require drivers, and there are none for it.

OontZ BudZ switches off It will not switch off automatically at any point when plugged in and charging. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna.

Make sure the OontZ BudZ battery has sufficient charge. Your Bluetooth device may be out of range; move the device within 33 unobstructed feet of the headphones Make sure the OontZ BudZ is not currently connected to any other device.

Make sure the OontZ BudZ is not currently connected to any other device. If your device is connected to another Bluetooth accessory, this may interfere with the pairing process, make sure your device is not connected to any other Bluetooth accessory when pairing to the OontZ BudZ. It turns itself off to conserve the battery charge. To maximize battery life we recommend that you fully discharge and then fully recharge the battery at least once every three months. The 10 hours was determined with the OontZ XL set at half volume.

The Bluetooth indicator will illuminate solid white. After about 12 — 15 seconds if the light begins to softly flash, it indicates the OontZ XL is in pairing mode; if the light remains solid white and there is a quiet beep, it indicates that the OontZ XL has automatically connected to a device.

The Bluetooth indicator light will turn off. It is quick and easy to pair and connect wirelessly to your Bluetooth device by following these steps:. After about 15 seconds, the Bluetooth indicator light will either:. In case b , you need to first disconnect that device before you can pair to a different device. To disconnect from the first device, press and hold the Bluetooth button on the top of the OontZ XL for about 3 seconds.

The Bluetooth indicator light will begin to softly flash, indicating the OontZ XL is now in pairing mode and that it is ready to be paired and connected to your device. Step 4 — It may take a short time to connect, and when successfully connected the Bluetooth indicator light will stop flashing and be a solid white. Step 5 — You can now wirelessly play your music or the audio from videos, games and movies.

You can use your device and the buttons on the OontZ XL to control your audio see section 3, items 7 — You will need to disconnect the first device from the OontZ XL before trying to pair to another device.

The Bluetooth indicator light will begin to softly flash, indicating the OontZ XL is now in pairing mode, and that it is ready to be paired and connected to the next device. It may connect without you being aware; you can check to see if the OontZ XL has already connected to a device, as the Bluetooth indicator light on top will be solid white. If the light is solid white, it indicates the OontZ XL is paired to a device and you must first disconnect from that device.

To pair with a laptop please follow steps 1 and 2 in section 5. You will need to first set up the OontZ XL as a device on your system and then select it from your list of devices. The OontZ XL may show up on your list of Bluetooth devices before it is set up, but you still need to go through the set up step first, or the OontZ will not be able to pair.

After downloading the system Bluetooth drivers you can go through the steps to connect to the OontZ XL. Note: The system Bluetooth drivers are all you need. There are no drivers for the OontZ XL. Incoming calls: when you receive a call you may answer it on your phone or by pressing the Bluetooth and speakerphone button See section 3, item 11 on the top of the OontZ XL.

Louder volumes will reduce the battery play time. Power Saving Feature - When playing from battery power the OontZ Angle 3 will turn off after 15 minutes of not playing audio to conserve the battery charge. Exception: when playing audio from an Amazon Echo Dot, the power saving feature on the speaker is disabled by the Amazon Echo Dot and the OontZ Angle 3 will not automatically turn off after 15 minutes.

You can continue to keep the speaker plugged in to a charging source even when it is fully charged. The volume will decrease to preserve the remaining battery charge. Charging Time It will take about 5 to 6 hours to fully charge a low battery.

If the blue light is flashing the OontZ Angle 3 is ready to pair and connect. If the blue light is solid the OontZ Angle 3 has automatically reconnected to the last audio source device the speaker was connected to and is ready to play. Note: The OontZ Angle 3 will automatically try to connect to the last audio source device it was connected to each time it is turned on and that audio source device is within range.

The OontZ Angle 3 can be connected to one audio source device at a time. To pair and connect to a different audio source device, you need to first disconnect the currently paired audio source device. To disconnect it, press and hold down the Bluetooth button for 3 seconds. The blue light will begin flashing and the OontZ Angle 3 is ready to pair and connect. If this occurs it is recommended to connect and play using the 3. First make sure to disconnect any other Bluetooth device from the Amazon Echo Dot.

The Amazon Echo Dot can only connect to one Bluetooth device at a time. The speaker will remain on and it will not automatically turn off after 15 minutes of not playing audio.

The Amazon Echo Dot is continuing to communicate to the speaker even when not playing audio and will use up the battery charge, at the same rate as full volume audio.

Or, 2 Turning the OontZ Angle 3 off when you are done listening. You can turn the OontZ Angle 3 speaker off by pressing and releasing the Power button on the OontZ Angle 3, or you can say "Alexa, disconnect my speaker" and the OontZ Angle 3 will automatically turn off after 15 minutes. If you need assistance with your Alexa app, contact Amazon's support through the app.

You need to remove the 3. When charging or using a 3. For assistance with questions or any issue with your OontZ Angle 3 that is not answered in the troubleshooting tips below, please contact us by visiting: TheOontZ. No audio playing from the OontZ Angle 3 when connected over Bluetooth.